Chevy S10 Specs
Al Chevy S10's from 1994 onwards either have a 4.3L Vortec 6 cylinder engine that pushes between 150 and 190 HP and around 230 lb's of torque. The other motor used in the Chevy S10's was a smaller 2.2L Vortec 2200 Inline 4 cylinder that pushes out a mere 120 HP and around 140 lb's of torque. Essentially, they are two completely different trucks to drive. If you're looking for something extremely fuel efficient the 2.2L Vortec might be your best bet though.
There's a lot more to the Chevy S10 than just the motor though. I've picked out a fairly common model and year and included full details of the specs below. Obviously, there are going to be a ton of differences between the years and models but this will give you the basic ideas on the Chevy S10's specs.
Specs for a 2004 Chevy S10 Base Model (Crew Cab.)
- Auxiliary oil cooler
- Auxiliary transmission cooler
- 4,293 cc 4.3 liters V 6 front engine with 101.6 mm bore, 88.4 mm stroke, 9.2 compression ratio, overhead valve and two valves per cylinder LU3
- Unleaded fuel 87
- Fuel economy EPA highway (mpg): 19 and EPA city (mpg): 15
- Multi-point injection fuel system
- 17.5 gallon main unleaded fuel tank
- Heavy duty engine cooling system
- Power: 142 kW , 190 HP SAE @ 4,400 rpm; 250 ft lb , 340 Nm @ 2,800 rpm
- Four-wheel ABS
- 3.42:1 axle ratio
- Four disc brakes including four ventilated discs
- Immobilizer
- Spacesaver steel rim under body spare wheel
- Wishbone front suspension independent with stabilizer bar and torsion springs , beam rear suspension rigid with leaf springs.